Professional Yacht Sandblasting, Powder Coating & Metal Restoration in Mallorca
At Balearic Coating Solutions, we specialise in professional sandblasting, powder coating and metal restoration for the marine, yachting and superyacht industries. Based in Palma de Mallorca, our workshop works with yacht crews, chief engineers, marine fabricators, yacht management companies and refit specialists throughout Mallorca. From engine room floor plates, generator covers, tender chocks and bimini structures to hatch covers, railings and ventilation grilles, we prepare and coat suitable removable metal components. Saltwater, humidity, corrosion and everyday wear can affect marine metalwork. We assess each project before agreeing a treatment, whether it is part of a refit, seasonal preparation or an individual component.
All components are assessed, never assumed suitable.
Seven stages. No shortcuts.
A typical sequence for suitable components. Each stage is adapted, or omitted, according to material, condition and the agreed specification.
- 01
Clean & degrease
Oils, grease and surface contamination are removed so they are not driven into the substrate during blasting.
- 02
Sandblast
Abrasive blasting removes old coatings, corrosion and contamination and creates a profile for the new coating to key into.
- 03
Inspect & prepare
The bare metal is inspected. Defects, masking requirements and areas needing protection are identified before coating.
- 04
Controlled pre-burn / outgassing
Where appropriate for the material, the part is heated in a controlled way to release trapped gases that could otherwise blemish the finish.
- 05
Epoxy powder primer
A compatible epoxy powder primer is applied as the corrosion-resistant foundation of the system.
- 06
Selected final powder coat
The agreed top coat is applied and cured, with colour and finish chosen for the component and its environment.
- 07
Final inspection & wrapping
The finished part is inspected and protectively wrapped for return to the vessel or refit team.
Restore what is already right for the boat.
- Keep original fit
- Refurbishing an existing component can avoid re-fabrication and keeps the dimensions the vessel was built around.
- Renewed protection
- A properly prepared, primed and coated surface gives the metal a fresh protective system against coastal exposure.
- Consistent appearance
- Batches of matching parts can be finished in an agreed colour so refitted areas look coherent.
- Local to Palma
- A Palma workshop close to the refit community, with direct communication with the owner throughout.
Materials & finishes, assessed for the part
We work with suitable aluminium, steel, stainless steel and other compatible metals. Available finishes may include gloss, satin, matt, textured, selected metallic effects and compatible clear coats. Suitability depends on the material, condition, dimensions, disassembly, operating environment and manufacturer requirements.
350 Yacht Components We Can Assess for Sandblasting & Powder Coating
A reference list, not a guarantee. Every item is assessed before any work is agreed.
- 001Engine room floor plates
- 002Generator covers
- 003Generator panels
- 004Engine rocker covers
- 005Engine valve covers
- 006Engine mounting brackets
- 007Engine support frames
- 008Engine guards
- 009Engine protective cages
- 010Engine room shelving
- 011Engine room shelf brackets
- 012Engine room storage racks
- 013Engine room lockers
- 014Engine room tool cabinets
- 015Engine room access doors
- 016Engine room access panels
- 017Engine room hatch covers
- 018Engine room inspection covers
- 019Engine room ladders
- 020Engine room staircases
- 021Engine room handrails
- 022Engine room steps
- 023Engine room equipment platforms
- 024Machinery drip trays
- 025Oil collection trays
- 026Metal splash guards
- 027Compressor covers
- 028Compressor mounting frames
- 029Pump housings
- 030Pump mounting brackets
- 031Hydraulic equipment brackets
- 032Hydraulic tank supports
- 033Water pump frames
- 034Pipe support brackets
- 035Pipe clamps
- 036Cable trays
- 037Cable ladder sections
- 038Cable tray brackets
- 039Battery trays
- 040Battery support frames
- 041Electrical cabinet housings
- 042Electrical cabinet doors
- 043Metal equipment stands
- 044Machinery protective shields
- 045Engine room ventilation covers
- 046Tender chocks
- 047Jet ski chocks
- 048Tender cradle frames
- 049Jet ski cradle frames
- 050Tender mounting brackets
- 051Jet ski mounting brackets
- 052Tender bimini structures
- 053Tender bimini poles
- 054Tender bimini brackets
- 055Tender handrails
- 056Tender boarding ladders
- 057Tender seat frames
- 058Tender console frames
- 059Tender storage racks
- 060Tender lifting frames
- 061Tender launching trolley frames
- 062Tender trailer frames
- 063Tender trailer mudguards
- 064Jet ski trailer frames
- 065Jet ski storage trolley frames
- 066Tender garage shelving
- 067Tender garage equipment racks
- 068Tender garage storage cages
- 069Tender winch covers
- 070Tender garage access panels
- 071Tender fuel container racks
- 072Tender equipment brackets
- 073Tender lifting-system guards
- 074Tender fender brackets
- 075Bimini frames
- 076Bimini poles
- 077Bimini support arms
- 078Bimini connecting brackets
- 079Bimini mounting plates
- 080Bimini hinges
- 081Bimini support bases
- 082Sunshade poles
- 083Sunshade support frames
- 084Sunshade brackets
- 085Awning support arms
- 086Awning mounting brackets
- 087Retractable awning frames
- 088Retractable awning metal covers
- 089Hardtop support frames
- 090T-top frames
- 091T-top mounting brackets
- 092Radar arch frames
- 093Canopy support poles
- 094Canopy mounting brackets
- 095Mooring cleats
- 096Mooring bollards
- 097Mooring bitts
- 098Fairleads
- 099Fairlead mounting plates
- 100Mooring line guide brackets
- 101Windlass housings
- 102Windlass covers
- 103Capstan covers
- 104Anchor roller frames
- 105Anchor roller side plates
- 106Anchor handling brackets
- 107Anchor locker covers
- 108Anchor chain guide housings
- 109Bow pulpit sections
- 110Stern pulpit sections
- 111Deck stanchions
- 112Stanchion bases
- 113Deck mounting plates
- 114Deck hinges
- 115Deck latches
- 116Deck access covers
- 117Deck drain covers
- 118Deck storage box frames
- 119Deck storage box lids
- 120Flagpole bases
- 121Flagpole brackets
- 122Removable guardrails
- 123Boarding gate frames
- 124Boarding gate panels
- 125Exterior yacht railings
- 126Interior yacht railings
- 127Staircase handrails
- 128Deck handrails
- 129Boarding handrails
- 130Swimming platform handrails
- 131Tender handrail brackets
- 132Grab handles
- 133Safety grab rails
- 134Rail mounting brackets
- 135Rail support posts
- 136Rail bases
- 137Rail end caps
- 138Removable safety barriers
- 139Balcony railings
- 140Crew access railings
- 141Hatch covers
- 142Hatch lids
- 143Hatch frames
- 144Hatch hinges
- 145Hatch handles
- 146Hatch locking brackets
- 147Engine room hatch covers
- 148Lazarette hatch covers
- 149Deck inspection hatches
- 150Access panel covers
- 151Access panel frames
- 152Exterior metal doors
- 153Interior metal doors
- 154Metal door frames
- 155Sliding door frames
- 156Sliding door metal panels
- 157Locker doors
- 158Locker door frames
- 159Locker hinges
- 160Garage door panels
- 161Garage door frames
- 162Watertight door exterior panels
- 163Watertight door frames
- 164Metal cabinet doors
- 165Metal cabinet frames
- 166Aluminium window frames
- 167Porthole frames
- 168Porthole outer rings
- 169Window surrounds
- 170Window trim frames
- 171Wheelhouse window frames
- 172Skylight frames
- 173Windscreen support frames
- 174Removable window mounting brackets
- 175Window protection grilles
- 176Passerelle frames
- 177Passerelle side rails
- 178Passerelle steps
- 179Passerelle mounting brackets
- 180Gangway frames
- 181Gangway mounting plates
- 182Gangway side rails
- 183Boarding ladders
- 184Swimming ladders
- 185Diving ladders
- 186Folding ladder frames
- 187Staircase frames
- 188Staircase steps
- 189Staircase side plates
- 190Staircase brackets
- 191Boarding platforms
- 192Boarding platform supports
- 193Dock boarding steps
- 194Pilot ladder support frames
- 195Bathing platform brackets
- 196Swim-step exterior covers
- 197Boarding staircase handrails
- 198Boarding gate brackets
- 199Engine room ventilation grilles
- 200Exterior air intake grilles
- 201Interior ventilation grilles
- 202Aluminium louvres
- 203Ventilation louvre panels
- 204Ventilation louvre frames
- 205Air intake housings
- 206Air outlet housings
- 207Ventilation ducting
- 208Ventilation duct brackets
- 209Ventilation fan covers
- 210Ventilation fan guards
- 211Ventilation fan frames
- 212Air conditioning trays
- 213Air conditioning mounting brackets
- 214Air conditioning equipment frames
- 215HVAC filter frames
- 216HVAC access panels
- 217Refrigeration equipment panels
- 218Refrigeration support brackets
- 219Chiller frames
- 220Condenser support brackets
- 221Metal ventilation boxes
- 222Outdoor chair frames
- 223Outdoor table frames
- 224Dining table legs
- 225Coffee table frames
- 226Bar stool frames
- 227Sofa support frames
- 228Bench frames
- 229Sun lounger frames
- 230Sun lounger legs
- 231Outdoor bar frames
- 232Outdoor kitchen frames
- 233Barbecue stands
- 234Metal cupboard frames
- 235Metal storage cabinets
- 236Metal storage drawers
- 237Planter frames
- 238Planter stands
- 239Umbrella bases
- 240Umbrella poles
- 241Umbrella support brackets
- 242Exterior decorative metal panels
- 243Decorative metal partitions
- 244Television mounting brackets
- 245Jacuzzi step frames
- 246Exterior shower support frames
- 247Metal rubbish bin housings
- 248Radar mounting brackets
- 249Radar pedestal bases
- 250Radar arch components
- 251Radar scanner supports
- 252Satellite dome support frames
- 253Satellite mounting brackets
- 254Antenna mounting plates
- 255Antenna brackets
- 256Communications mast frames
- 257Communications mast brackets
- 258Navigation light brackets
- 259Searchlight mounting brackets
- 260Searchlight bases
- 261Camera mounting brackets
- 262CCTV camera metal housings
- 263Loudspeaker mounting brackets
- 264Exterior speaker covers
- 265Exterior speaker grilles
- 266PA system mounting brackets
- 267Solar panel frames
- 268Solar panel mounting brackets
- 269Instrument mounting plates
- 270Instrument console metal housings
- 271Signal mast supports
- 272Mast access steps
- 273Yacht davit exterior covers
- 274Davit mounting brackets
- 275Davit support frames
- 276Crane exterior panels
- 277Crane protective guards
- 278Crane mounting plates
- 279Crane pedestal exterior covers
- 280Lifting equipment guards
- 281Winch exterior housings
- 282Winch mounting brackets
- 283Winch protective covers
- 284Tender crane support brackets
- 285Tender lifting arm covers
- 286Lift system protective panels
- 287Diving bottle racks
- 288Scuba tank holders
- 289Scuba tank mounting brackets
- 290Dive equipment storage cages
- 291Dive ladder frames
- 292Diving platform frames
- 293Paddleboard storage racks
- 294Surfboard storage racks
- 295Kayak storage frames
- 296Watersports equipment baskets
- 297Watersports storage shelves
- 298Watersports trolley frames
- 299Fishing rod holders
- 300Fishing rod storage racks
- 301Fishing tower frames
- 302Fishing tower brackets
- 303Outrigger bases
- 304Fishing seat pedestals
- 305Bait table frames
- 306Cooler support frames
- 307Mast steps
- 308Mast base plates
- 309Mast support brackets
- 310Spreader mounting brackets
- 311Boom mounting brackets
- 312Boom vang exterior brackets
- 313Sail handling equipment covers
- 314Traveller support frames
- 315Traveller support brackets
- 316Winch exterior covers
- 317Mast instrument brackets
- 318Mast navigation brackets
- 319Sail storage racks
- 320Sail storage brackets
- 321Cockpit instrument housings
- 322Detachable rigging support brackets
- 323Fire extinguisher holders
- 324Fire extinguisher mounting brackets
- 325Fire equipment cabinet housings
- 326Lifebuoy mounting brackets
- 327Life raft cradle frames
- 328Life raft mounting brackets
- 329Safety rail brackets
- 330Emergency steering guards
- 331Crew storage lockers
- 332Crew storage shelves
- 333Tool storage racks
- 334Tool trolley frames
- 335Maintenance trolley frames
- 336Metal workbench frames
- 337Cleaning equipment racks
- 338Hose reel frames
- 339Hose reel brackets
- 340Metal utility baskets
- 341Storage container frames
- 342Metal protective cages
- 343Electrical junction box housings
- 344Empty electrical enclosures
- 345Electrical mounting panels
- 346Cable support brackets
- 347Metal sign frames
- 348Metal nameplate mounting brackets
- 349Decorative yacht metal trim
- 350Removable protective metal panels
Some components need more than a coating decision.
Safety-critical, load-bearing, hydraulic, electrical, watertight, high-temperature, permanently submerged and precision-machined components must be reviewed with the vessel’s engineer, the manufacturer and, where relevant, the classification or flag requirements before any sandblasting or coating is considered. We may decline work that is not appropriate.
- Safety-critical
- Load-bearing
- Hydraulic
- Electrical
- Watertight
- High-temperature
- Permanently submerged
- Precision-machined
All treatments depend on material, condition, dimensions, disassembly, operating environment and manufacturer requirements.
Can’t Find Your Yacht Component?
At Balearic Coating Solutions, we can assess hundreds of different yacht components for sandblasting, powder coating and refurbishment. If you have a metal component that requires restoration, send us a few photographs and approximate dimensions. Whether it is an individual bracket, hatch cover, bimini structure, generator cover, handrail or a collection of engine-room components, we are happy to discuss your project. We can often provide an initial quotation using photographs and measurements.
For a quotation, please provide:
- Photographs of the component
- Approximate dimensions
- Quantity of items
- Existing condition
- Preferred colour and finish
- Vessel name or location if relevant
- Required completion date
Questions from captains and engineers.
Many aluminium components can be powder coated after assessment. The alloy, condition, size, construction and operating environment determine whether the process is appropriate.